Chordial honey extractor (cassette) МК - 9 (230), 12/220V

The honey extractor is of medium-sized, chordial, designed for pumping honey in apiaries with up to 150 beehives. The honey extractor uses a chordial arrangement of the frames, the cassettes are fully rotatable, made for 230 mm and 145 mm frames.

Number of pumped-out frames at a time:

• 145 mm - 9 pcs,
• 230 mm (Ruth) - 9 pcs,
• 300 mm (Dadan) – unsupported.

Chordial honey extractor (cassette), МК-9(230), 12/220V is made from the following materials:
1. Tank:

• Material: AISI 304 food-grade stainless steel.
• Wall thickness, mm: 0.8,
• Bottom thickness, mm: 0,8,
• Tapered bottom,
• Welded tap.

2. Drum (rotor):

• Drum type: chordial (cassette),
• Material: AISI 304 food-grade stainless steel,
• Shaft: AISI 304 round bar.

3. Frame (legs and cross member assembly):

• Materia: steel 3,
• Thickness of the material, mm: at least 2.5 mm.

The honey extractor is driven by a gear motor with continuously variable speed regulation.

There is also a control panel “BeeStar” with 9 recorded automatic programs that can be edited (any of 9 programs can be edited, the setting instruction and the characteristics of the standard programs are described in the general data sheet on the honey extractor). The standard controller has 6 programs for the radial type and 3 for the cassette type. The programs differ in speed and pumping time.

Pumping time on the honey extractor МК9(230), 220 V: from 3 to 5 minutes.

For protection during the operation, the control panel is equipped with an emergency stop button, the tank with frames is covered with special protective polycarbonate glass (also serves as protection against contamination), which is attached to the hinges.

Warranty for the honey extractor МК-9(230), 12/220V is 24 months.

Completion kit of МК-9(230), 12/220V:

• Honey extractor МК-9(230), 12/220V,
• The warranty card (24 months.),
• Instructions for setting/adjusting the remote control and using the honey extractor.