Chordial honey extractor (cassette), with partitions, 9 cassettes, МК9П, 12/ 220V

The honey extractor is of medium-sized, chordial, with the partitions between the cassettes, designed for pumping honey in apiaries up to 150 beehives. For pumping, chordial (cassette) arrangement of frames is used with different number of pieces, depending on the type of standard frames, the cassettes are not fully rotary, and for avoiding pumping honey from one frame to another between the cassette partitions set of stainless steel AISI 304 are installed.
Number of pumped-out frames at a time:

• 145 mm - 18 pcs,
• 230 mm (Ruth) - 9 pcs,
• 300 mm (Dadan) - 9 pcs.

Chordial honey extractor (cassette), with partitions, МК9П, 12/220 V is made from the following materials:

1. Tank:

• Material: AISI 304 food-grade stainless steel.
• Wall thickness, mm: 0.8,
• Bottom thickness, mm: 0,8,
• Tapered bottom,
• Welded tap.

2. Drum (rotor):

• Drum type: chordial (cassette), with partitions
• Material: AISI 304 food-grade stainless steel,
• Shaft: AISI 304 round bar.

• Pulley motor: 0.25 kW

3. Frame (legs and cross member assembly):

• Material:  steel 3,
• Thickness of the material, mm: at least 2.5 mm.

The honey extractor is driven by a gear motor with continuously variable speed regulation.

There is also a control panel “BeeStar” with 9 recorded automatic programs that can be edited (any of 9 programs can be edited, the setting instruction and the characteristics of the standard programs are described in the general data sheet on the honey extractor). The standard controller has 6 programs for the radial type and 3 for the cassette type. The programs differ in speed and pumping time.

Pumping time on the honey extractor MK9П (300) 12/220 V:

• 145 mm frame - 5 min,
• 230 mm frame (Ruth) - 3 min. 40 sec.,
• 300 mm frame (Dadan) - 2 min. 30 sec.

For protection during the operation, the control panel is equipped with an emergency stop button, the tank with frames is covered with special protective polycarbonate glass (also serves as protection against contamination), which is attached to the hinges.

Warranty for the honey extractor MK9П (300) 12/220V is 24 months.

Completion kit of МК9П, 12/220 V:

• The honey extractor МК9П, 12/220 V,

• The warranty card (24 months),
• Instructions for setting/adjusting the remote control and using the honey extractor.