An automatic honey extractor of large-sized, designed for an apiary of up to 250 beehives and more. The main advantage of this honey extractor is the ability to pump honey in two ways: radial or chordal, depending on your choice. It is possible due to the possibility of easy removal and installation of the cassettes. This honey extractor is a combination of two honey extractors into one: the radial honey extractor МР60н, in which the same number of frames can be pumped, regardless of the frame nominal size (shop, Ruth, Dadan) and the chordial MK9(300).

Number of pumped-out frames you can pump at a time:

In radial mode:

• 145 mm - 60 pcs,
• 230 mm (Ruth) - 60 pcs,
• 300 mm (Dadan ) - 60 pcs.

In cassette mode:

• 145 mm - 18 pcs,
• 230 mm (Ruth) - 9 pcs,
• 300 mm (Dadan) - 9 pcs.

Pumping time depends on the selected mode and frame nominal size: in the radial version from 13 to 33 minutes, in the chordial version from 2.5 to 5 minutes.

Honey extractor (combi) chordial-radial МРК-60/9kas(300mm), 220V is made from the following materials:

1. Tank:

• Material: AISI 304 food-grade stainless steel.
• Wall thickness, mm: 0.8,
• Bottom thickness, mm: 0,8,
• Tapered bottom,
• Welded tap.

2. Drum (rotor) and cassettes:

• Drum type: combined (chordial-radial),
• Material: AISI 304 food-grade stainless steel,
• Shaft: AISI 304 round bar,
• Cassettes - rotary, stainless steel rod (AISI 304) Ø 4 mm.

3. Frame (legs and cross member assembly):

• Material: steel 3,
• Thickness of the material, mm: at least 2.5 mm.

The honey extractor is driven by a gear motor with continuously variable speed regulation.

There is also a control panel “BeeStar” with 9 recorded automatic programs that can be edited (any of 9 programs can be edited, the setting instruction and the characteristics of the standard programs are described in the general data sheet on the honey extractor). The standard controller has 6 programs for the radial type and 3 for the cassette type. The programs differ in speed and pumping time.
For protection during the operation, the control panel is equipped with an emergency stop button, the tank with frames is covered with special protective polycarbonate glass (also serves as protection against contamination), which is attached to the hinges.

Warranty for the honey extractor МРК-60/9(300) 220 V is 24 months.

Completion kit of МРК-60/9(300) 220 V:

• Honey extractor МРК-60/9(300) 220 V,
• The warranty card (24 months.),

Instructions for setting/adjusting the remote control and using the honey extractor.